-
EPNUO spot repair presses are designed for targeted maintenance and repair of rubber conveyor belts, including edge damage, localized surface wear, and longitudinal tears. These compact vulcanizers offer a cost-effective solution for extending belt life without full replacement.
Designed for repairing small and minor surface damage on conveyor belts, this unit supports a standard repair area of 250 × 250 mm and is equipped with a 300 × 300 mm heating plate. Custom sizes are also available upon request, please contact our technical team for further assistance.
| EPN-5 Spot Repair Vulcanizing Press | |||||
| Belt Type | Belt Width | Broken Size | Heating Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 650-1600mm | 250×250mm | 300×300mm | Depend on actual size | ＜0.5 ＜1.0 (beam type) |
| EPN-5B Spot Repair Vulcanizing Press | |||||
| Belt Type | Belt Width | Broken Size | Heating Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 1800-2400mm | 250×250mm | 300×300mm | Depend on actual size | ＜0.5 ＜1.0 (beam type) |
Designed for repairing edge damage on conveyor belts, the EPN-6 supports a repair area of 250 × 900 mm, 250 × 1100 mm, 250 × 1400 mm, and other specifications as needed. Standard heating plate sizes include 300 × 1000 mm, 300 × 1200 mm, and 300 × 1500 mm. For custom dimensions or technical support, please consult our team directly.
| EPN-6 Edge Repair Vulcanizing Press | |||||
| Belt Type | Belt Width | Broken Size | Heating Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 650-3200mm | 250×900mm 250×1400mm |
300×1000mm 300×1500mm |
Depend on actual size | ＜0.5 ＜0.8 |
Engineered to repair a wide range of conveyor belt damages, including edge wear, localized abrasion, and longitudinal tears, this equipment offers a practical and efficient solution for on-site maintenance. Available in standard sizes: 300 × 1000 mm, 300 × 1200 mm, 300 × 1500 mm, 300 × 2000 mm, and 350 × 1000 mm, 350 × 1200 mm, 350 × 1500 mm, 350 × 2000 mm. For custom specifications, please contact our technical team.
| EPN-7 Longitudinal Tear Repair Vulcanizing Press | |||||
| Belt Type | Belt Width | Broken Size | Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 650-1600mm | 250×900mm 250×1400mm |
300×1000mm 300×1500mm |
Depend on actual size | ＜0.5 ＜1.0 (beam type) |
| EPN-7B Longitudinal Tear Repair Vulcanizing Press | |||||
| Belt Type | Belt Width | Broken Size | Plate Size | Power | Pressure (MPa) |
| Canvas, nylon, steel-cord belts | 1800-2400mm | 250×900mm 250×1400mm |
300×1000mm 300×1500mm |
Depend on actual size | ＜0.5 ＜1.0 (beam type) |
A spot repair press is used for repairing small, localized damage to conveyor belts, such as punctures, cuts, or other minor surface defects.
The vulcanizing temperature is generally set around 145°C. The required time depends on the thickness of the belt, usually ranging from 15 to 30 minutes.
We’re here to help with expert advice and prompt support with efficient solutions.
